See our Other Inverter Prices
 Xantrex
GT Grid-Tie InvertersXantrex GT grid-tie solar inverters have an
integrated lockable 600-volt PV/utility disconnect switch which may
eliminate the need for external disconnects in some areas. A split-chassis
design keeps the wiring box separate from the inverter, allowing for
easy access and spacing to the AC and DC string terminals and eliminating
exposed wiring during installation and removal.
The wiring box includes eight 3/4-inch knockouts and easy access DC and
AC terminal blocks that accept wire sizes from #14 to #6 AWG. The GT
enclosure is a NEMA 3R, allowing for both outdoor and indoor installation.
For large systems, multiple inverters can be mounted side by side. GT
inverters come standard with a 2-line LCD display. The display shows
inverter power, daily and lifetime energy production, PV array voltage and
current, utility voltage and frequency, time online "selling" today, fault
messages, and also two installer customizable screens. When inverters are
daisy chained together using CAT5 Ethernet cable, each inverter will report
the output of the entire system.
The Xantrex GT offers an isolated RS232 port and two Xanbus RJ45
communication ports. No additional communication ports are needed to connect
to a PC. An optional wall mount inverter monitor and communication gateway
can be connected to the inverter(s) with Cat-5 cable. The communications
gateway connects to a computer to monitor inverter performance.
Large heat-sink offers heat dispersion
without the need for a cooling fan. UL listed. Standard
5-year warranty, with 5-year extension available. | 
