Xantrex XW Sine-Wave Inverter
Battery-Based
For Off-Grid and Grid-Tie Systems

The Xantrex XW Series hybrid inverter/charger offers an innovative integrated design which minimizes external balance-of -system components allowing for much quicker and easier installations.  The XW Series offers pure sine-wave capability as well as split-phase operation right out of the box for 120VAC and or 240 VAC solutions.

Up to three units can be operated in parallel, offering 18 kW 120/240 VAC power.

The Xantrex XW can be used as a grid-tie battery backup inverter or an off-grid inverter. One or two XW MPPT (Maximum Power Point Tracking) charge controllers are required for PV grid-tie operation. Unsurpassed surge capacity is achieved by using digital control to regulate the output voltage from dropping during surge.  A full 200% rated output power is delivered to load under surge conditions. Efficient, power-factor corrected high current multi-stage battery charging minimizes recharge time and electricity/fuel costs and prolongs battery life.

The inverter display panel gives status-at-a-glance.  LEDs indicate AC in status, faults/warnings, equalize mode and battery state of charge. Three character LCDs indicates output power or charge current.

The new wall mount design is easier to install than the SW power panel. The power distribution panel includes all AC/DC disconnects and wiring so there is no need to individually purchase separate components.  The distribution panel and conduit box are factory wired and labeled to support one inverter  in a code compliant manner and it has wiring space and conduit and breaker knockouts to add up to three inverter and/or four charge controllers.  Field Reversible door with a magnetic catch makes access to wiring easy.  

Options include an XW connection kit for a second inverter, an XW conduit box for systems with more than two inverters or to retrofit XW inverters into existing systems which already have AC/DC disconnects.  Conduit box/raceway has barriers to ensure separation between low-voltage communication cables and AC and DC wires.

XW-MPPT60-150 60A Solar Charge Controller with integrated PV ground fault protection accepts arrays with open circuit voltage up to 150 VAC and employs dynamic maximum power point tracking. 

The XW system control panel plugs into Xanbus network and provides a central user interface to configure and monitor all components in the system.

5 year warranty.  

Dimensions of the inverter are 16" X 23" X 9".  

The inverter is field serviceable without needing to remove it from the wall.

More information is available from the Xantrex site at http://www.xantrex.com/xw/ .

Prices subject to change. Verify prices before placing orders.