ProductsContact Us
 
 
> State Rebates Available
Check what rebates are available
in your state
> Useful Energy Links
Renewable Energy Links
> What size system do you need?
Use this System Loads Worksheet to calculate the AC and DC loads on your system
> Voltage Drop Index
Determine the wire size needed for your project
Our Sales Policy
 
Contact Us
Not all the photovoltaic solar or wind products Beyond Oil Solar sells are listed on the web site. Check our very competitive prices and please email us at info@beyondoilsolar.com for a quick quote on any product you do not see listed!

 

 
Check Our Solar Panel Prices

Matrix Photowatt PW750 Solar Modules  

Over 20 years of experiences in supplying modules all over the world ensures the reliability of Photowatt solar products.

This solar panel is designed with an optimum configuration that fulfills the most demanding PV applications including high voltage grid support systems.

Delivered Fully Configured, this new product configuration meets the high standards of the professional consumer in a light-weight, highly reliable package.

Special Features and End Uses:

  • Telecommunications
  • Cathodic Protection
  • Water Pumping
  • Signaling
  • Rural Electrification
  • Private Residences
  • Commercial Building
  • Grid Connected large scale systems


Specifications

Solar Panel Model
Nominal Voltage
Typical Peak Power (Pmax)
Voltage @ Peak Power (Vmp)
Current @ Peak Power (Imp)
Short Circuit Current (Isc)
Open Circuit Voltage (Voc)
Minimum Power (Pmin)
PW750-90
12V
90W
17.8V
5.0A
5.7A
22.20V
85.1W
PW750-85
12V
85W
17.6V
4.8A
5.4A
22.00V
80.1W
PW750-80
12V
80W
17.3V
4.6A
5.0A
21.90V
75.1W
PW750-75
12V
75W
17.0V
4.4A
4.7A
21.60V
70.1W
PW750-70
12V
70W
16.7V
4.2A
4.5A
21.3V
65.0W
(Above specifications at STC: Insol. 1000W/m2, AM 1.5, Cell T 25degC)
Maximum Syst. Oper. Voltage:
600V
Minimum Pypass Diode:
6A
Series Fuse Rate:
8A

Size


Weight:
17 lb. /7.8kg.
Packed 40/18kg.
The PW 750 series modules use Photowatt's multi crystalline technology. The 200 micron solar cells are individually characterized and electronically matched prior to interconnection. Encapsulation beneath high transmission tempered glass is accomplished using an advanced, UV resistant thermal setting plastic. The encapsulation, ethylene vinyl acetate, cushions the operating characteristics of the solar cell under virtually any climatic conditions. The rear surface of the module is completely sealed from moisture and mechanical damage by a continuous high strength polymer sheet.

The glass/tedlar construction of the module minimizes weight while providing a durable, protective environment for the solar cells. A double glass version is also available upon request.

This product is configured for 12 volt systems operation. By pass diodes are factory fitted as standard. Additionally, this module can be configured into a panel at the factory and pre-wired to guarantee field performance.

 


Check our Solar Panel Prices